431.263—Materials incorporated by reference.
(a) General.
The Department incorporates by reference the following test procedure into subpart O of part 431. The Director of the Federal Register has approved the material listed in paragraph (b) of this section for incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Any subsequent amendment to this material by the standard-setting organization will not affect the DOE test procedures unless DOE amends its test procedures. The Department incorporates the material as it exists on the date of the approval by the Federal Register and a notice of any change in the material will be published in the Federal Register.
(b) Test procedure incorporated by reference.
American Society for Testing and Materials (ASTM) Standard F2324-03, “Standard Test Method for Prerinse Spray Valves,” October, 2003.
(c) Availability of reference—
(1) Inspection of the test procedure.
The test procedure incorporated by reference is available for inspection at:
(i)
National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.
(ii)
U.S. Department of Energy, Forrestal Building, Room 1J-018 (Resource Room of the Building Technologies Program), 1000 Independence Avenue, SW., Washington, DC 20585-0121, (202) 586-9127, between 9 a.m. and 4 p.m., Monday through Friday, except Federal holidays.
(2) Obtaining a copy of the standard.
The standard incorporated by reference may be obtained from the following source: Copies of ASTM Standard F2324-03 can be obtained from ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, or telephone (610) 832-9585.